Mobile pool service across Corona, CAMon–Fri 7am–5pm · Sat 8am–2pm
Questions? Reach us at 951-545-4118📞 Call💬 Text

Home › Services › Pool Equipment Repair › Pool Pump Repair

Pool Pump Repair in Corona, CA

If the pump stops, the water stops moving and algae follows fast. We come to you, find the cause and fix it, or show you the replacement options.

Corona Swimming Pool Service repairs residential pool pumps in Corona, CA, including motors that hum but won't start, noisy bearings, leaking shaft seals and pumps that lose prime. Pump repair is part of our pool and equipment repair in Corona, and we quote before any work starts.

Common Pool Pump Problems

  • Hums but won't start: often a failed capacitor or a jammed impeller
  • Loud grinding or screeching: worn motor bearings
  • Water leaking under the pump: a worn shaft seal, which can ruin the motor if left alone
  • Loses prime or fills with air: a cracked lid, a dry lid O-ring, low water level or a suction-side air leak
  • Trips the breaker: a wiring fault or a motor that has shorted

What to Do Before We Arrive

Turn the pump off at the breaker if it is leaking, smoking or tripping power. Check that the water level is halfway up the skimmer opening and that the skimmer and pump baskets are empty.

Repair or Replace?

A newer pump with one failed part is usually worth repairing. An older single-speed pump with a failing motor is often a good time to switch to a variable-speed pump, which uses far less power. California efficiency rules also limit which replacement pumps can be installed, so we'll tell you what applies to your pool.

Save Power After the Repair

Running the pump at lower speed for longer, during off-peak hours, cuts the bill. Our pool pump efficiency tips explain how.

How It Works

  1. Call or send a message. Tell us about your pool and what it needs.
  2. Get a clear quote. We look at your pool and equipment and give you a price before any work starts.
  3. Relax. We come to your home on a set day and keep your pool clean and balanced.
Freshly cleaned freeform pool and spa with a suction cleaner running

Common Questions

Why is my pool pump humming but not running?

The most common causes are a failed start capacitor or an impeller jammed with debris. Turn it off so the motor doesn't overheat, and call us.

Why does my pool pump keep losing prime?

Air is getting in. Check the lid O-ring, the water level and the baskets; if those are fine, the leak is usually on the suction side of the plumbing.

Is it worth repairing an old pool pump?

If only one part has failed, often yes. If the motor is failing on an older single-speed pump, a variable-speed replacement usually pays for itself in lower power bills.

Do you repair all pump brands?

We work on the major residential pump brands, including Pentair, Hayward and Jandy.

Ready for a Cleaner Pool?

Spend your weekends in the pool, not cleaning it.